Compare Products

2019 Cub Cadet Pro Z 60 in. S Kawasaki 31 hp
2019 Cub Cadet Pro Z 60 in. S Kawasaki 31 hp

Specs

General Information

Manufacturer
Cub Cadet
Cub Cadet
Model Year
2019
2019
Model
Pro Z 60 in. S Kawasaki 31 hp
Pro Z 60 in. S Kawasaki 31 hp
Model Code
53TIHKUV050
53TIHKUV050
Color
Cub Cadet Yellow
Cub Cadet Yellow

Body

Frame

Fully welded, full-length 3/8 x 5 in. laser cut steel / integrated tie-down slots

Side construction - 5 / 16 in. (0.313) steel on trim and discharge sides

Rear bumper - 5 / 16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch

Fully welded, full-length 3/8 x 5 in. laser cut steel / integrated tie-down slots

Side construction - 5 / 16 in. (0.313) steel on trim and discharge sides

Rear bumper - 5 / 16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch

Seat
High-back dial suspension with EVC cushion, padded arm rests ISO mounted base (lateral suspension) angle back adjust and lumbar support seat belt
High-back dial suspension with EVC cushion, padded arm rests ISO mounted base (lateral suspension) angle back adjust and lumbar support seat belt
Rollover Protection (ROPS)
2 x 2 in. spring-latch tool-less foldable 3 position
2 x 2 in. spring-latch tool-less foldable 3 position
Safety Features
Operator presence
Operator presence

Drivetrain

Transmission/Drive
Parker HTG 14 cc pump 280 cc wheel motor
Parker HTG 14 cc pump 280 cc wheel motor
Travel Speed

Forward - 12 mph

Reverse - 6 mph

Forward - 12 mph

Reverse - 6 mph

Wheels/Tires

Anti-Scalping - 2 Front HD with Bushings & Grease Zerk

Front tires - 16 x 6.5-8 in. turf

Rear tires - 24 x 12-12 in. (Turf Tread)

Anti-Scalping - 2 Front HD with Bushings & Grease Zerk

Front tires - 16 x 6.5-8 in. turf

Rear tires - 24 x 12-12 in. (Turf Tread)

Axles

Front - 2 x 3 in. solid axle tube with ISO dampening suspension

Yolk - 1/2 in. thick steel front yokes

Front - 2 x 3 in. solid axle tube with ISO dampening suspension

Yolk - 1/2 in. thick steel front yokes

Brakes
Parking - Hand-operated lever with integrated hydro pump release lever
Parking - Hand-operated lever with integrated hydro pump release lever

Electrical

Instrumentation

Hour meter - Standard Electronic

Cup holder - Intergrated into Side Pod

Hour meter - Standard Electronic

Cup holder - Intergrated into Side Pod

Engine

Engine Make
Kawasaki
Kawasaki
Engine Model
FX921V
FX921V
Horsepower
31 hp
31 hp
Displacement
999 cc
999 cc

Measurements

Length
With discharge chute UP and ROPs DOWN - 86 in.
With discharge chute UP and ROPs DOWN - 86 in.
Width
With discharge chute UP and ROPs DOWN - 62 in.
With discharge chute UP and ROPs DOWN - 62 in.
Height
With discharge chute UP and ROPs DOWN - 52 in.
With discharge chute UP and ROPs DOWN - 52 in.
Weight
1,562 lb.
1,562 lb.
Mowing Width
60 in.
60 in.
Mowing Height Range
1 - 5 in.
1 - 5 in.

Operational

Steering
Multi-position Quick-adjust steering column
Multi-position Quick-adjust steering column
Deck Construction

Construction - 7ga. top plate 7ga. bottom reinforcement ¼ in. rolled leading edge

Height adjustment - Foot pedal with spring assist 16 Positions

Material - fabricated 7ga. (0.187 in.) steel shell

Construction - 7ga. top plate 7ga. bottom reinforcement ¼ in. rolled leading edge

Height adjustment - Foot pedal with spring assist 16 Positions

Material - fabricated 7ga. (0.187 in.) steel shell

Discharge
Chute - High-density, impact-resistant rubber
Chute - High-density, impact-resistant rubber
Spindles

Construction - 8 in. sealed cast aluminum housing (maintenance-free)

Covers - Steel - Tooless Quick Release

Construction - 8 in. sealed cast aluminum housing (maintenance-free)

Covers - Steel - Tooless Quick Release

Blades

60 in. Fabricated Deck

Triple-blade / High-lift blade (standard) Marbain Blade

60 in. Fabricated Deck

Triple-blade / High-lift blade (standard) Marbain Blade

Blade Tip Speed
Approx. - 18,500 fpm
Approx. - 18,500 fpm
Power Take-Off (PTO)

Warner Clutch - 125 ft. lb.

Throttle / Key switch - HD Low-profile throttle lever, sealed key switch and electronic fingertip engagement

Warner Clutch - 125 ft. lb.

Throttle / Key switch - HD Low-profile throttle lever, sealed key switch and electronic fingertip engagement

Other

Warranty
3 year / no hour limit commercial warranty and 5 year / 1,750 hour limited deck construction warranty
3 year / no hour limit commercial warranty and 5 year / 1,750 hour limited deck construction warranty

Features

Features

  • MAXIMIZE YOUR WORKDAY: The steering wheel zero-turn option increases hillside stability, helping you cover acres up to 10% faster than comparable lap bar units. Plus, with the power of high-performance engines, you can tackle tough jobs and achieve a quality cut, day in and day out.
  • BEST-IN-CLASS DECK: Tackle the toughest conditions with the industry-leading only triple-7-gauge steel cutting deck: a 7-gauge deck shell with 7-gauge top and bottom reinforcements. Designed for durability, our decks produce a quality cut you can always count on.
  • MAINTENANCE MADE EASIER: Slash downtime thanks to Cub Cadet’s new spindle design. Completely sealed, dual double-row ball bearings make the spindle maintenance-free for its lifetime, and anti-friction washers prevent self-tightening, making blade maintenance easier.
  • PIVOTING FRONT AXLE: A pivoting front axle allows the front end of the PRO Z to ride across unseen terrain while protecting the quality of the cut. The frame and axle float as the PRO Z moves, allowing the deck to adapt to the shape of the terrain and avoid scalping and turf damage.
  • MADE TO MAKE THE GRADE: The new PRO Z 972 SD is a dual-wheel commercial zero-turn engineered to dominate steep hills up to a 25-degrees. It’s the best-in-class mower and the ultimate mowing solution for municipalities and properties with varying terrain.

Features

  • MAXIMIZE YOUR WORKDAY: The steering wheel zero-turn option increases hillside stability, helping you cover acres up to 10% faster than comparable lap bar units. Plus, with the power of high-performance engines, you can tackle tough jobs and achieve a quality cut, day in and day out.
  • BEST-IN-CLASS DECK: Tackle the toughest conditions with the industry-leading only triple-7-gauge steel cutting deck: a 7-gauge deck shell with 7-gauge top and bottom reinforcements. Designed for durability, our decks produce a quality cut you can always count on.
  • MAINTENANCE MADE EASIER: Slash downtime thanks to Cub Cadet’s new spindle design. Completely sealed, dual double-row ball bearings make the spindle maintenance-free for its lifetime, and anti-friction washers prevent self-tightening, making blade maintenance easier.
  • PIVOTING FRONT AXLE: A pivoting front axle allows the front end of the PRO Z to ride across unseen terrain while protecting the quality of the cut. The frame and axle float as the PRO Z moves, allowing the deck to adapt to the shape of the terrain and avoid scalping and turf damage.
  • MADE TO MAKE THE GRADE: The new PRO Z 972 SD is a dual-wheel commercial zero-turn engineered to dominate steep hills up to a 25-degrees. It’s the best-in-class mower and the ultimate mowing solution for municipalities and properties with varying terrain.